10g-16 x 16mm Metal Self Drilling Screw Zinc Yellow Phillips
Pack size 1 Screw of packs of 25 screws
- Flat Top Self Drilling Screws have an extremely low profile head with broad bearing surfaces primary used to fasten thin metal sections eg. studwork. The extremely low head permits overlaying with plaster board or other lining materials without affecting seating.
- Easy to install with a PH2 Phillips screwdriver or PH2 Phillips Driver Bit in a power tool.
- Material / Coating: Zinc Yellow plated refers to the colour of the chromate that is applied after zinc has been applied. Yellow chromate increases the overall protection of the finish. Commonly used in the automotive industry. The coating is intended to be used internally as it only offers an average level of protection against corrosion. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel or Galvanised range
| Specification |
|
| Type |
Self Drilling Metal Screw |
| Head Style |
Flat Head |
| Screw Size |
10g (4.80mm) |
| Thread Type |
Coarse |
| Product Diameter D |
4.65 - 4.80mm |
| System of Measurement |
Screw Gauge |
| Thread Pitch |
16 TPI |
| Thread Direction |
Right Hand |
| Closest Size in mm |
4.80mm |
| Closest Size in Imperial |
0.19" |
| Screw Length |
Length measurement is from under head to end of drill point |
| Item Length L |
16mm |
| Thread Length T |
Full Thread |
| Head Diameter A |
8.00 - 8.20mm |
| Head Height H |
1.10mm |
| Drill Point Length P |
6.50mm |
| Recommended Drill Speed |
Under 3000 rpm |
| Min To Max Steel Thickness |
0.75 - 3.50mm |
| Drive Style |
Phillips |
| Driver Bit Size |
PH2 |
| Screw Point |
Drill Point |
| Material |
Hardened Steel |
| Class Grade |
Class 2 |
| Finish |
Zinc Yellow Plated |
| Corrosion Protection Level |
Moderate |
| Standard |
AS3566 |
| Brand |
Carclips |
| |
|
| |
|
| |
|
| |
|
| |
|
